2. Mikrotik Basic

Step One (access)

• Connect LAN Port on CPE power Injector to Port 1 on home AP
• Open WinBox
• IP (192.168.88.1)

• • User Name: admin
  • Password: (blank)

Step Two (User Name & Device Name)

• System Tab

• • Users
  • Click plus symbol
  • Add User Name and Pass Word
  • Group Full
    • Username and Password same as CPE

• System Tab

• • Identity
  • Add Customer Name before Mikrotik

Step Three (IP Address and range)

• • Quick Set

• • Make sure Address Acquisition is DHCP
  • Right side of quick set screen.
  • IP Adress (192.168.10.1)
  • Netmask: 255.255.255.0
  • DHCP server Range 192.168.10.100-192.168.10.150
  • Check NAT
  • Check UPnP

Step Four (WiFi name & Password)

• Quick Set Menu

• • Left Side of quick set screen
  • Wifi Name: Example WiFi-2GHz Wifi-5GHz
  • Make sure county is America
  • Wifi password, Customers desired password

Step Five (Remote access to Mikrotik)

• Command

• • In Podio There is a copy and pasted command under Remote access to mikrotik
  • Copy command:

  • /ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=0

  • /ip dns set allow-remote-requests=no/radiusadd address=74.81.176.88 secret=windriver service=login/user groupset read policy=local,telnet,ssh,ftp,reboot,read,test,winbox,web,sniff,romon,dude,tikapp,!write,!policy,!password,!sensitive,!api

    add name=tech policy=local,telnet,ssh,ftp,reboot,read,write,test,winbox,web,sniff,romon,dude,tikapp,!policy,!password,!sensitive,!api

    /user aaa

    set use-radius=yes

• In the customer Ap click on the terminal tab

• • Paste command into the terminal press enter

• IP tab Customer AP

• • Firewall
  • At the bottom of the list there will be a green check mark. With the number 8291 in the same line
  • Click and Hold command(line) and drag all the way above the red X’s

Step Six (Router Board Update)

• System

• • Router Board
  • Upgrade
  • Yes
  • OK

• System

• • Reboot