Mikrotik Making IP static in tower Router

After install Installer will need to make the IP’s (that were given by DHCP) were assigned to equipment installed to “Static IP”

You should know the tower you are pointing to such as KWRR, Signal Hill, Beaver Creek Rohn.

You will first need to know the router IP for the tower. This can be found in UISP App.

1. You will need to open Winbox. (If using phone go to step 5)
2. You will add the IP to “Connect To”
   1. You will use your login information. (or “User name provided to you” and “PW that will be provided to you”)
   2. Click “connect”
3. Click on the “IP Tab” found on the left side of the Winbox
   1. Then click on DHCP Server.
   2. Click on Leases
   3. Find the IP that you were assigned from Visp or Look for a “D” on the left side next to address
   4. double click the IP
      1. a new tab will open click on “Make Static”
      2. Then click “OK”
      3. Repeat for other Devices.
4. End session.
5. USING IPHONE IOS MIKROTIK APP
6. Go to setting on the phone (IF NOT ON OUR NETWORK)
   1. Turn on VPN
7. Open Mikrotik APP
8. You will add the IP to “Connect To”
   1. You will use your login information. (or “User name provided to you” and “PW that will be provided to you”)
   2. Click “connect”
9. Press on the gear on the top right hand of the screen
   1. Press on IP
   2. Press on DHCP Server
   3. Press on Leases
   4. Find the IP you were assigned through Visp (verify with Mac Address)
   5. Press on IP
   6. Press on the 3 dots on the top right corner of the screen
   7. Press “Make Static”
   8. Repeat for other Devices.
   9. Close APP